![]() ![]() The following shows the maximum wire length for each gauge. Four-conductor, 22-gauge or larger stranded wire.strongly recommends installing an alpha keypad with at least 32 zones to ensure the “Communication Failure” trouble condition is displayed to the user.Drill and bits for screws and/or wall anchors.Small blade screwdriver and Phillips screwdriver.This code is necessary as uses this code to access panel programming and read information stored on the panel. It requires that the user have access to their panel’s Installer Code prior to the creation of their account. The SEM is a bit different when it comes to compatibility. ![]() The following devices listed have been tested and certified to work with ’s SEM-DSC PowerSeries. It does not require going into console mode as the SEM-Honeywell/ADEMCO Vista requires. Note : The SEM can view and report everything performed on touchscreen keypads. ![]() Other keypads and versions are expected to work, but have not been fully tested by. The panel version is displayed as a 4-digit number (e.g., 0460 in section 900 is panel version 4.60) Keypad and peripheral compatibility Keypads Note: When using an LCD5500 or PK5500 keypad, this can also be found by going to Installer Programming and then section 900. To determine if the SEM is compatible with a panel, locate the version on the panel’s prom chip sticker. The PowerSeries System Enhancement Module (SEM) is only compatible with the following panels that are version 4.20+: This guide will cover how to determine if your DSC PowerSeries panel is compatible with the SEM and how to connect it to the SEM if it is. If you have a DSC PowerSeries panel, you may be able to connect it to using the System Enhancement Module or SEM. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |